COMMERCIAL
MODELS
CSB 52, 82, 120
IMMERSION MOUNT THERMOSTATSSANDBLASTER
COMMERCIAL ELECTRIC WATER HEATERS
Designed for use as a recovery heater having its own storage tank or booster for supplying sanitizing rinse water for dishwashing.
FEATURES(Optional)
Low Lead Content
For more information on this product contact: State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800.365.0024
Meets the standby loss requirements of the U.S. Department of Energy and current edition ASHRAE/IESNA 90.1.
ADVANCED ELECTRONIC CONTROL - Plain English text and animated icons display detailed operational and diagnostic information. Fault or Alert messages appear if an operational issue occurs. Immersion temperature control adjustable through a range of 90°F to 190°F.
■iCOMM™ compatible and can be monitored from remote locations. Call 1.888.WATER02 for more information.
ECONOMY MODE OPERATION - Control system automatically lowers the Operating Set Point by a programmed value during
LINEAR SEQUENCING - Banks of heating elements (3 elements per bank) are energized according to adjustable (1 to 20°) differential set points for each bank. First bank on is the last bank off. Helps reduce current surge and provides accurate water temperature control.
GOLD ELEMENTS - CSB models ship with the gold plated elements (see element availability chart on back). Patented elements provide long life and superior scaling resistance. Low watt density means lower surface temperature to minimize scale buildup and more surface to heat water. Gold elements carry a
GLASSLINED TANK - Three sizes: 50, 80 and
FUSING - Protects all elements, thermostats, and internal wiring circuits against excess current flow. Meets National Electrical Code requirements that
STANDARD VOLTAGES - 208, 240 and 480V
TERMINAL BLOCK - Factory installed. Just bring the service to the heater and connect to block.
MAGNETIC CONTACTORS - Heavy duty, UL rated 100,000 cycles.
OTHER STANDARD FEATURES -
■Immersion style thermostats ■ Simplified circuitry, color coded for ease of service
■Two anode rods for maximum corrosion protection ■ Cabinet has bonderized undercoat with baked enamel finish ■ Bottom inlet and top outlet openings ■ Brass drain valve ■ CSA certified and ASME rated T&P Relief Valve ■ Single panel control box
■THREE YEAR LIMITED TANK WARRANTY - For complete warranty information,
consult written warranty or contact State Water Heaters.
OPTIONS -
■UL listed conversion kits to adjust voltage and kW requirements in the field before and after installation ■ ASME 150 psi tank construction ■ International voltages - 220, 380, 400, 415, 575, and 600 volts, three phase available with Y connected elements ■ MANIFOLD KITS - for multiple tank installations. Two heaters
SOLID.STATE.
SCESS00608 | Revised May 2011 |