AT&T merlin legend manual Feature Programming Chart, Quick Dialing Features

Feature Programming Chart

Use the chart below as a quick reference when you want to program features onto your voice terminal.

		Feature Name
[Suggested Button Label)			Description	Programming Code				Notes
	QUICK DIALING FEATURES
	Outside Auto Dial		Dial outside telephone	● Dial	*90.
			numbers or PBX/Centrex	● Dial an outside number,
		Name or	feature codes with one	an account number, or a
		Location	touch.	PBX,		C e n t r e x , o r
				Custom Calling feature
				code.
	Auto Intercom		Place ringing intercom	● Dial	*91.		A button with lights is recom-
			calls with one touch.	● Dial a MERLIN system			mended but not required. The
				intercom number.			green light goes on when the other
		Name or
							person is using his or her voice ter-
		Location					minal or is using the Do Not Disturb
							feature. You can use an Auto Inter-
							com button whenever instructions
							call for dialing an intercom number.
							You cannot program both Auto In-
							tercom and Manual Signaling for
							the same voice terminal.
	Manual Signaling		Generate a beep at	● Dial	*6.		Use Manual Signaling to contact
			another person’s voice	● Dial	the intercom		someone	with a prearranged
		Signal Name	terminal.	number for the person			signal. If you program this feature
				you want to signal.			on a button with lights, the green
							light goes on when the other person
							is using his or her voice terminal or
							is using the Do Not Disturb feature.
							You cannot program		Manual
							Signaling and Auto Intercom for the
							same voice terminal.
	Personal Speed Dial		Assign a 3~character code	● Dial a Personal Speed			For 5- and 10-button voice terminals
	(uses a dial code in-		(#01 through #22) to each	Dial code (#01 through			only.
	stead of a button)		telephone number you call	#22).
			frequently.	● Dial	*90.
				● Dial	an outside tele-
				phone number, a PBX,
				Centrex,		or Custom
				Calling feature code, or
				an account number.
	System Speed Dial		If you programmed	● Dial	*95.		You assign System Speed Dial
			System Speed Dial codes	● Dial a System Speed			codes to	frequently	called
		Name or	for frequently dialed	Dial code (60 through			numbers; then everyone connected
		Location	numbers, you can assign	99).			to your MERLIN system can use
			any of them to buttons for				those codes for abbreviated dialing.
			one-touch dialing.				It is not necessary to assign these
							codes to buttons.
	Saved Number Redial		Save a number indefinitely	● Dial	*74.		If you have a 5- or 10-button voice
			for later redialing.				terminal, you can dial a code to use
		Saved Number					this feature instead of using a
							button
	Last Number Redial		Redial the number you	● Dial	*73.		If you have a 5- or 10-button voice
			dialed most recently.				terminal, you can dial a code to use
		Last Number					this feature instead of using a
							button.

74