7.Refer to the Voice Terminal Configuration Form for this user to see what restrictions you plan to assign to this voice terminal. Then touchCall Rstr until the green light beside it shows the code for the call restric- tions you want this voice terminal to have. Each successive touch gives you one of the following codes:
Steady green on | = | unrestricted (all calls allowed) |
Flashing green | = | toll restricted (intercom and local calls only |
|
| plus allowed lists, if you assign any) |
Green off | = outward restricted (intercom calls only plus | |
|
| allowed lists, if you assign any) |
(See page 44 for more information about allowed lists.)
8.Repeat steps 6 and 7 of this procedure until you have assigned call restrictions to all your voice terminals.
If you want to give a voice terminal the same call restrictions as one that has already been set up, use the shortcut below.
NOTE: When you copy the call restrictions, you also copy
●Dial the intercom number or touch the Auto Intercom button of the new voice terminal.
●Touch Copy.
●Dial the intercom number or touch the Auto Intercom button of the voice terminal whose restrictions you want to copy.
9.Touch Adm Tel.
The lights next to the administration mode buttons flash again.
10.Continue to administer your system or leave administration mode by following the boxed instructions on page 25.
4 3
