15
English
3Make sure you loaded the paper correctly and did not force the paper in to
the All-In-One.

When I insert the All-In-One software CD, nothing

happens

From the Desktop, double-click the My Computer icon, and then double-click the
CD-ROM drive icon.

All-In-One is not communicating with the computer

1Disconnect and reconnect both ends of the USB cable. For help, refer to the
setup documentation.
2Unplug the power cord from the electrical wall outlet, plug it back in, and
then press Power. For more information, refer to the setup documentation.
3Restart the computer. If the problem continues, remove and then reinstall
the software. For more information, see page 16.

Installation appears incomplete

The software may not be installed properly. Try the following:
1Right-click the My computer icon.
For Windows XP, click Start to access the My computer icon.
2Click Properties.
3For Windows 98 or Windows Me, click the Device Manager tab.
For Windows 2000 or Windows XP, select the Hardware tab, and then click
the Device Manager button.
4Look for the Other Devices category. If there are any Lexmark devices
shown here, highlight them and, then press the Delete key.
Note: The Other Devices category appears only when unknown devices
are present. Do not delete any Lexmark items unless they are
present under the Other Devices category.
5Insert the CD, and install the software again. Do not restart the computer.
For help, refer to the setup documentation.
Printing troubleshooting

All-In-One prints slowly

1Close all programs not in use. The memory resources may be low.
2Make sure the Print Properties Quality/Spe ed setting is set on Normal or
Quick Print. For more information, see page 7.
3Try printing a smaller file. If the memory resources are too low, you may not
be able to print larger files. Consider purchasing more memor y.
Note: Photographs typically have a larger file size. Try lowering the
scanning resolution.

Print is too dark or smudged

1Remove the paper as it exits. Let the ink dry before handling.
2Adjust the Quality/Speed setting in Print Proper ties or in the All-In-One
Center. For more information, see page 7 or page 6.
The Better or Best Quality/Speed setting may cause smearing if used with
plain paper. Try using Normal.
3Open the Lexmark Solution Center (see page 8).
4From the Maintenance tab, click Clean to fix horizontal streaks.

Vertical lines are jagged or edges are not smooth

1Adjust the Quality/Speed setting in Print Proper ties. For help, see page 7.
For best print quality, select Better or Best.
2Align the print cartridges. To align the print cartridges:
aOpen the Lexmark Solution Center (see page 8).
bFrom the Maintenance tab, click Align to fix blurry edges.

White lines appear in graphics or solid black areas

Clean the print cartridge nozzles. Going long periods without using the All-In-
One can cause the print cartridge noz zles to become clogged. To clean the
cartridge nozzles:
1Open the Lexmark Solution Center (see page 8).
2From the Maintenance tab, click Clean to fix horizontal streaks.