16

All-In-One has a paper jam

1Follow the instructions on the screen for clearing the paper jam.
2Make sure you are using paper designed for an inkjet printer. For a list of
recommended papers, see page 9.
3Make sure you are loading the paper correctly. For more information, see
page 10.
4Make sure the paper guide is against the left edge of the paper. For more
information, see page 10.
Scanning, copying, and faxing troubleshooting

Scanning was not successful

The software may not be installed properly. Follow the instructions for “All-In-One
is not communicating with the computer” on page 15.

Scanning or using a scanned image with a software

program takes a long time or freezes the computer

Lower the scanning resolution. Scanning resolution is much different than
printing resolution and is generally set much lower. To change the scanning
resolution:
1Open the Lexmark All-In-One Center. For help, see page 5.
2From the Scan section, click See More Scan Settings.
3Click Display Advanced Scan Settings.
4From the Scan tab of Advanced Scan Settings, enter a lower scan
resolution.

Edge of the copy does not print

•Make sure the original item is properly oriented on the glass. For more
information, see page 11.
•Make sure the area you want to copy is not larger than the printable area o f
the page. Apply the Fit-to-page feature. To apply the Fit-to-page feature:
1Open the Lexmark All-In-One Center (see page 5).
2From the Copy section, click See More Copy Settings.
3From the Reduce/Enlarge section, click the second button, and then select
Fit to page from the corresponding drop-down menu.
4Copy your document again.

Copy button on the control panel does not work

•Make sure the computer is on. The computer must be on in order for the All-
In-One to work.
•Make sure you properly installed the software. For help, refer to the setup
documentation. The software must be installed for the copier to work.

Fax function does not work

•Make sure the computer and the All-In-One are on.
•Make sure the computer is connected to a phone line. A phone connec tion
is required for faxing to function.
•The memory may be full. Wait until the faxes in memory have been sent, and
then send the current fax again.
Removing and reinstalling the software
If the All-In-One software is not functioning properly or a communications error
message appears when you try to use the All-In-One, you may need to remove,
and then reinstall the printer software.
1From the desktop, click Start Programs Lexmark1200 Series
Uninstall Lexmark 1200 Series.
Note: If Uninstall is not an option on the menu, see “All-In-One i s not
communicating with the computer” on page 15.
2Follow the instructions on the computer screen to remove the All-In-One
software.
3Restart the computer before reinstalling the software.
4Insert the CD and follow the instructions on the comp uter screen to install
the software. For help, refer to the setup documentation.