Franklin MWS-2018 manual Cartridge Care, Resetting BOOKMAN, Troubleshooting BOOKMAN

Cartridge Care Resetting BOOKMAN

•Do not touch the metal contacts on the cartridges. Caution: Touching these electrical contacts with statically charged ob- jects, including your fingers, could erase information entered in a car- tridge or built-in book.

•Do not put excessive pressure on the cartridges.

•Do not expose the cartridges to heat, cold, or liquids.

If the BOOKMAN keyboard fails to re- spond, or if its screen performs errati- cally, first press CLEAR and then press ON/OFF twice. If nothing happens, follow the steps below to reset it.

Warning: Pressing the reset button with more then very light pressure may permanently disable your BOOKMAN. In addition, resetting BOOKMAN erases settings and information entered into its built-in book, and in an installed cartridge.

1.Hold CLEAR and press ON/OFF . If nothing happens, try Step 2.

2.Use a paperclip to gently press BOOKMAN’s reset button.

The reset button is recessed in a pin- sized hole on the back of BOOK- MAN. Look for it on the battery cover or near the cartridge slot.

➤Troubleshooting BOOKMAN

•Make sure your cartridge, if any, is installed correctly.

•Check that the cartridge’s metal contacts are dirt-and dust-free.

16