Installing Cartridges |
| Selecting Books |
|
|
|
Warning: Never install or remove a cartridge when BOOKMAN is on. If you do, information that you entered in its
1.Turn BOOKMAN off.
2.Turn BOOKMAN over.
3.Align the tabs on the car- tridge with the notches in the slot.
Once you have installed a cartridge in your BOOKMAN, you must select which book you want to use.
1.Turn BOOKMAN on.
2.Press CARD .
These are sample books.
3.Press 
or 
to highlight the book you want to use.
4.Press ENTER to select it.
4.Press the cartridge down until it snaps into place.
➤Removing Cartridges
Warning: When you remove a cartridge to install another, informa- tion that you entered in the removed cartridge will be erased.
➤Resuming Where You Left Off
You can turn off BOOKMAN at any screen. When you turn BOOKMAN on again, the screen that you last viewed appears.
4
