42

Troubleshooting & Maintenance

Troubleshooting & Maintenance

 

 

 

Problem:

 

Solution:

 

 

 

No power

 

Check if the AC cord is properly connected.

 

 

Unplug the AC cord once, and wait for approximately 5-10 seconds and

 

 

then plug it in again.

 

 

No sound or picture

Check if the connected TV is turned on.

 

 

Check if the connections are made securely and correctly.

 

 

Check whether the connected TV or other device supports HDCP. (This

 

 

unit will not output a video signal unless the other device supports

 

 

HDCP.)

 

 

Check whether the output format of this unit (HDMI® FORMAT) matches

 

 

the supported input format of other connected device.

Distorted picture

 

Sometimes a small amount of picture distortion may appear. This is not

 

 

a malfunction.

 

 

Connect this unit directly to the TV.

 

 

Completely distorted picture or black

Make sure the disc is compatible with this unit.

/white picture with Blu-ray

 

Disc™/DVD

 

 

 

 

No sound or distorted sound

Adjust the volume.

 

 

Check if speakers are connected correctly.

 

 

Check the HDMI® connections.

 

 

Check the settings in the Audio menu.

 

 

Picture freezes momentarily during

Check the disc for fingerprints/scratches and clean with a soft cloth

playback

 

wiping from center to edge.

 

 

Clean the disc.

 

 

Disc cannot be played back

Clean the disc.

 

 

Ensure the disc label is facing up.

 

 

Check if the disc is defective by trying another disc.

 

 

Cancel the ratings control or change the control level.

 

 

Insert a correct disc that can be played back on this unit.

 

 

No return to start-up screen when

Reset this unit by turning it off, then on again.

disc is removed

 

 

The unit does not respond to the remote control

Aim the remote control directly at infrared sensor window on the front panel.

Reduce the distance to infrared sensor window. Replace the batteries in the remote control.

Re-insert the batteries with their polarities (+ / - signs) as indicated.

Buttons do not work or the unit stops

To completely reset the unit, unplug the AC cord from the AC outlet for

responding

approximately 5-10 seconds.

 

 

The unit does not respond to some

Operations may not be permitted by the disc.

operating commands during

Refer to the instructions of the disc.

playback

 

The unit cannot read Blu-ray Disc™/DVD/CD

Dew condensation may form inside the unit. Do not use this unit for at least a few hours until its inside gets dry.

Wipe the dirt off the disc or replace the disc.

Page 42
Image 42
Toshiba BDX2300KC, BDX3300KC manual Troubleshooting & Maintenance