Sonance Sonamp Series 275 SE/275X3 SE Features, Protect/Clipping LEDs for easy level setup

1250MKII and 1230 12-Channel Amps. The 1250MKII and 1230 have L/R, AUX and direct channel inputs with DIP switches that give you the ultimate flexibility in system configuration. Both models have 12 channels that can be bridged in pairs. For example, a single 1250MKII could have two pairs of channels bridged to provide 100 watts/ch of power to a set of speakers for a dedicated listening area, while the other eight unbridged channels provide 50 watts/ch of power to a four-room distributed audio system. Tamper-resistant input sensitivity controls simplify adjustments, while binding post speaker terminals accept five different types of speaker wire termina- tions. And like all Sonamp amplifiers (except the

Twelve channels enable you to configure the perfect system for a home theater or whole-home application.

ASAP1), the 1250MKII and 1230 have line outputs that make it simple to daisy-chain multiple amplifiers in larger systems.

275 SE/275X3 SE FEATURES

•Dual power supplies and high-current amplifier topology enhances reliability and stability. 275 SE and 275X3 SE are stable to a 2.66-ohm load, enabling them to drive three sets of 8-ohm speakers simultaneously.

•Defeatable high-pass filter protects in-wall volume controls (and the speakers they’re connected to)

•Can be bridged to provide up to 270 Watts at 8 ohms (275 SE only)

•Active current limit, short-circuit and speaker protection; auto-resetting thermal protection shutoff

•Protect/Clipping LEDs for easy level setup

•Ground lift switch to break a hum loop caused by the chassis making contact in a rack system.

•275X3 SE features built-in switcher for up to three pairs of speakers

Smart Amplifier Technology (SAT) gives you outstanding flexibility to upgrade or outfit your system simply by inserting a new module.