THE RIGHT AMPLIFIER FOR ANY ROOM.

The Sonamp line of amplifiers was built for exceptional sound reproduction and outstanding flexibility. Whatever your amplifier needs, we have a model that’s perfect for it. Everything from multi-zone, whole house audio distribution, to home theater sound. We even offer ASAP and SAT models that automatically switch a single zone between two different sources. Take a look and see which Sonamp model is right for you.

SONAMP 275 SE, 275X3 SE,

275 SE RMF & 275X3 SE RMF

Power Output (both channels driven): 75 watts RMS per channel @ 8 ohms; 125 watts RMS per channel @ 4 ohms; 135 watts RMS per channel @ 2.7 ohms

Bridged Power (20Hz–20kHz): 250 watts RMS @ 8 ohms (275 SE & 275 SE RMF only)

Bridged Midband Power (1kHz): 270 watts RMS @ 8 ohms (275 SE & 275 SE RMF only)

Total Harmonic Distortion: <0.05% (20Hz–20kHz @ 8

ohms); <0.08% (20Hz–20kHz @ 4 ohms); <0.15% (20Hz–20kHz @ 2.7 ohms)

Signal-to-Noise Ratio: 105dB below rated output (A-weighted)

Input Sensitivity: 700mv for 75 watts @ 8 ohms

BBE Effect: +9dB, +6dB, OFF

Power Consumption: 675 watts @ 4 ohms (full power)

Heat Output: 1330 BTU/HR (at full power)

275 SE & 275X3 SE Dimensions (W x H x D):

16-3/4" x 3-7/8" x 15-1/4" (425mm x 98mm x 387mm)

275 SE RMF & 275X3 SE RMF Dimensions:

19" x 3-1/2" x 15-1/4" (483mm x 89mm x 387mm) 275 SE RMF & 275X3 SE RMF Rack Height: 2u Shipping Weight: 24 lbs (10.9 kg)

SONAMP 2120T & 2120T RMF

Power Output (Stereo, both channels driven): 120 watts RMS per channel @ 8 ohms; 160 watts RMS per channel @ 4 ohms

Dynamic Power at Clipping: 163 watts per channel @ 8 ohms; 242 watts per channel @ 4 ohms

Total Harmonic Distortion: 0.05% 20Hz–20kHz @ 8 ohms (120 WRMS); 0.1% 20Hz–20kHz @ 4 ohms (160 WRMS) I.M. Distortion: (SMPTE 4:1): 0.02% @ 1 watt (8 ohms); 0.02% @ 120 watts (8 ohms)

Signal-to-Noise Ratio: >100dB below rated output (A-wtd)

Input Sensitivity: 1.1 Volt for 120 watts RMS @ 8 ohms

Input Impedance: 47k ohms

Power Consumption: 750 watts maximum (4 ohms, full power); 10 watts (idle, no signal)

Heat Output: 1332 BTU/HR (at full power)

2120T Dimensions (W x H x D):

16-3/4" x 5-5/8" x 12-5/8" (425mm x 143mm x 321mm)

2120T RMF Dimensions (W x H x D):

19" x 5-1/4" x 12-5/8" (483mm x 133mm x 321mm)

2120T RMF Rack Height: 3u

Shipping Weight: 26 lbs (11.8 kg)

SONAMP ASAP1

Power Output (Stereo): 20 watts per channel @ 8 ohms

Switching Triggers: Audio and video

Inputs: Main system–Speaker-level; Local system–Speaker/Line-level

Sensitivity & delay adjustments: 3-stage detector circuitry

Total Harmonic Distortion: <0.1%

IM Distortion (SMPTE 4-1): <0.05% @ 8 ohms

Signal-to-Noise Ratio: 100dB below rated output

Input Sensitivity: 500mv

Protection Circuitry: AC fuse, thermal, short circuit

Heat Output: 55 BTU/HR (at full power)

Dimensions (W x H x D): 13-1/2" x 3" x 4-5/8" (343mm x 76mm x 118mm)

Shipping Weight: 7 lbs (3.2 kg)

SONAMP 1250MKII & 1250MKII RMF

Power Output (All Channels Driver): 50 watts per channel x 12 @ 8 ohms; 75 watts per channel x 12 @ 4 ohms Power Output (Bridged): 100 watts per channel x 6

@ 8 ohms

Dynamic Headroom: +1.9dB x 12 @ 8 ohms; +1.8dB x 12 @ 4 ohms; ±3.5dB x 6 @ 8 ohms (bridged)

Total Harmonic Distortion: <0.03% (20Hz–20kHz @ 8 ohms, 50 watts); <0.06% (20Hz–20kHz @ 4 ohms, 75 watts); <0.01% (1 kHz 8 ohms, 50 watts); <0.01% (1 kHz 4 ohms, 75 watts)

I.M. Distortion (SMPTE 4:1): <0.01% @ 50 watts, 8 ohms

Signal-to-Noise Ratio: -100dB below rated output (A wtd)

Input Sensitivity: 700 millivolts for 50 watts RMS @ 8 ohms

Input Impedance: 20k ohms

Power Consumption: 1800 watts maximum @ 4 ohms, full power; 10 watts, standby

Fuse: 15A, MDA, 250V

Heat Output: 2868 BTU/HR

1250MKII Dimensions (W x H x D): 16-3/4" x 9-1/2" x 16-1/2" (425mm x 241mm x 419mm)

1250MKII RMF Dimensions: 19" x 8-3/4" x 16-1/2" (483mm x 222mm x 419mm)

1250MKII Rack Height: 5u

Shipping Weight: 55 lbs (25 kg)

SONAMP SMART AMPLIFIER TECHNOLOGY® MODULES

SONAMP BBE SAT MODULE

Adds BBE® Sound Enhancement to SAT series amplifiers.

•High-pass filter jumpers on PCB (-3dB @ 27Hz)

•Status LEDs

•Control voltage can trigger BBE effect on/off and change effect amount (+6dB, +9dB)

•Line-level outputs for daisy-chaining multiple amplifiers

Specifications

BBE Effect: +9dB; +6dB; OFF (switchable)

Frequency Response (Hi-pass filter off): 20Hz–20kHz

(±0.25dB); (Hi-pass filter ON): 27Hz–20kHz (±0.25dB)

Output: Buffered

Dimensions (W x H x D): 5-3/4" x 1-1/4" x 4" (146mm x 31mm x 102mm)

Shipping Weight: 2 lbs (0.9 kg)

SONAMP AL1 SAT MODULE

Automatic line level audio switcher. Allows automatic switching from the main source input (distributed audio source) to a local source (such as a TV), while amplifying the signal through the amplifier. Adds flexibility to distrib- uted audio applications.

•High-pass filter jumpers on PCB (-3dB @ 27Hz)

•Status LEDs for each input

•Quality signal relay for audio switching

•Short-circuit protection for control voltage output

•Line-level outputs for daisy-chaining multiple amplifiers

Specifications

Frequency Response (Hi-pass filter off): 20Hz–20kHz

(±0.25dB); (Hi-pass filter ON): 27Hz–20kHz (±0.25dB)

Input Impedance: 42k ohms (Input A); 25k ohms (Input B)

Output: Non-Buffered

Connectors: Gold-plated RCA

Detect Sensitivity: 6mv–1v (adjustable via trim pot)

B to A delay time: 3 sec–2.5 min (adjustable via trim pot)

Dimensions (W x H x D): 5-3/4" x 1-1/4" x 4” (146mm x 31mm x 102mm)

Shipping Weight: 2 lbs (0.9 kg)

SONAMP ASAP2SAT & ASAP2SAT RMF Output Power (stereo): 50 watts RMS per channel @ 8 ohms; 65 watts per channel @ 4 ohms

Total Harmonic Distortion: <0.2% 20Hz–20kHz @ 8 ohms; <1.0% 20Hz–20kHz @ 4 ohms

B-to-A Delay: 3 seconds to 90 seconds (adjustable)

Heat Output: 785 BTU/HR (at full power)

Protection Circuits: AC fuse, thermal, short circuit

Signal-to-Noise Ratio: 100dB below rated output (A-weighted)

Input Sensitivity: 300mv for 59 watts @ 8 ohms

Input Impedance: 47k ohms, Min.

Power Consumption: 360 watts

ASAP2SAT Dimensions (W x H x D):

16-3/4" x 1-3/4" x 11-5/8" (425mm x 44mm x 295mm)

ASAP2SAT RMF Dimensions (W x H x D):

19" x 1-3/4" x 11-5/8" (483mm x 44mm x 295mm) ASAP2SAT RMF Rack Height: 1u

Shipping Weight: 12 lbs (5.45 kg)

SONAMP 1230 & 1230 RMF

Power Output (All Channels Driven): 30 watts per channel @ 8 ohms; 45 watts per channel @ 4 ohms

Power Output (Bridged): 60 watts per channel x 6 @ 8 ohms

IHF: Dynamic Power: 49 Watts per channel,12 channels @ 8 ohms; 78 Watts per channel,12 channels @ 4 ohms; 158 Watts per channel, 6 channels @ 8 ohms (bridged) Dynamic Headroom: +2.13dB,12 channels @ 8 ohms; +2.38dB,12 channels @ 4 ohms; +4.15dB, 6 channels @ 8 ohms (bridged)

Total Harmonic Distortion: <0.03% (20Hz–20kHz @ 8 ohms, 30W RMS); <0.10% (20Hz–20kHz @ 4 ohms, 45W RMS) I.M. Distortion: (SMPTE 4:1): <0.01% @ 30 watts, 8 ohms Signal to Noise Ratio: 100dB below rated output (A wtd) Input Sensitivity: 700 millivolt for 30 watts RMS @ 8 ohms Input Impedance: 20k ohms

Power Consumption: 1400 watts maximum, 4 ohms, full power

Fuse: 10A AG Heat Output: 2732 BTU/HR

1230 Dimensions (W x H x D): 16-3/4" x 5-3/4" x 15-3/8" (425mm x 146mm x 391mm)

1230 RMF Dimensions: 19" x 5-1/4" x 15-3/8" (482mm x 133mm x 391mm)

1230 RMF Rack Height: 3u Shipping Weight: 38 lbs (17 kg)

SONAMP LR1 SAT MODULE

Adds balanced line functionality to SAT series amplifiers. Enables the amplifier to receive a balanced audio signal, eliminating noise pickup over long cable runs in distrib- uted audio systems.

•High-pass filter jumpers on PCB (-3dB @ 27Hz)

•Line-level outputs for daisy-chaining amplifiers

•Requires balanced audio sender at the signal source and shielded 4-conductor audio wire.

Specifications

Frequency Response (Hi-pass filter off): 20Hz–20kHz

(±0.25dB); (Hi-pass filter ON): 27Hz–20kHz (±0.25dB)

Input Impedance: 12k ohms

Input Connector: Removable screw type

RCA Connectors: Gold-plated

Dimensions (W x H x D): 5-3/4" x 1-1/4" x 4" (146mm x 31mm x 102mm)

Shipping Weight: 2 lbs (0.9 kg)

Page 6 Page 8
Page 7
Image 7
Sonance Sonamp Series warranty Right Amplifier for ANY Room, Sonamp 275 SE, 275X3 SE SE RMF & 275X3 SE RMF
Page 6 Page 8

Sonamp Series specifications

The Sonance Sonamp series is a distinguished line of amplifiers designed to deliver exceptional audio performance in various environments, particularly in custom installations. This series is revered for its blend of power, versatility, and reliability, making it a preferred choice among audiophiles and professional installers alike.

One of the standout features of the Sonamp series is its outstanding power output. With models available that can deliver from 50 watts per channel to over 200 watts per channel, these amplifiers can drive a wide range of speakers, ensuring robust sound quality even in larger spaces. This scalability makes it possible to configure the system according to the specific acoustics and size of any venue, whether it be a small room or a sprawling outdoor area.

Another significant technology integrated into the Sonamp series is the Class D amplification architecture. This design not only provides highly efficient power utilization but also reduces heat generation, allowing the amplifiers to operate longer without interruption. Additionally, the compact size of Class D amplifiers provides flexibility in installation, making them ideal for discreet setups in residential and commercial spaces.

The Sonamp series also features a range of inputs, including RCA, balanced XLR, and local area network (LAN) inputs for streamlined connectivity with various source devices. This diversity of connections allows for seamless integration into any audio system. Furthermore, with options for both stereo and mono operation, users can easily configure the amplifiers to meet their specific audio delivery needs.

Durability is key in the design of Sonamp amplifiers. Constructed with high-quality materials and components, they are built to withstand the rigors of professional use while delivering consistent performance over time. The amplifiers also come equipped with advanced thermal protection circuitry, ensuring the unit safely manages heat build-up during intense usage.

In terms of user experience, the Sonamp series is designed to be easy to operate. Many models feature intuitive controls and LED indicators, allowing users to monitor performance at a glance. Additionally, some models in the series offer built-in DSP (Digital Signal Processing), enabling precise control over sound characteristics and allowing for tailored audio experiences that suit individual preferences.

Overall, the Sonance Sonamp series represents a powerful solution for high-quality sound amplification. Its blend of sophisticated technology, robust construction, and user-friendly features makes it an excellent choice for anyone seeking to elevate their audio experience in residential or commercial settings.
Top Page Image Contents