![Sonance Virtuoso® SSDR-Series](/images/new-backgrounds/17131/171311x1.webp)
Sonance Virtuoso® SSDR-Series
Single-Stereo Speakers
Virtuoso V833ssDR
SPECIFICATIONS
Sonance Virtuoso® SSDR-Series Speakers
Sonance Virtuoso SSDR® speakers combine the outputs of your amplifier’s left and right stereo channels, and play both signals from just one speaker. Totally redesigned for 2006, these new Virtuoso SSDR speakers incorporate advanced driver materials and technology that give them stunning musical performance.
Virtuoso SSDR speakers are ideal for use in hallways, bath- rooms, closets, or any location where a pair of stereo speakers would be impractical. The Virtuoso SSDR’s innovative fully- pivoting design delivers outstanding musical performance from a wide variety of challenging installation locations.
Features:
• Completely redesigned for 2006 with dramatically improved |
sound quality and quicker/easier installation. |
• |
superior sound even when placement options are limited. |
• Advanced driver materials deliver extremely accurate musical |
performance. |
• 8” Diameter woofers deliver deep, powerful bass. |
• |
resonances. |
• |
V833SSDR
Tweeter: | Two ¾" (19mm) Silk domes, Ferrofluid cooled |
|
Midrange: | Two 3" (76mm) Carbon Fiber cones, rubber |
|
| surrounds |
|
Woofer: | 8" (203mm) Carbon Fiber cone, dual voice coil, |
|
| rubber surround, pivoting |
|
Frequency Response: | 32Hz – 20kHz ±3dB |
|
Impedance: | 6 Ohms nominal; 4 Ohms minimum |
|
Power Handling: | 5 Watts minimum; 150 Watts maximum | Virtuoso V833SSDR |
SPL: | 91dB SPL (2.83V 1 meter) | |
Grille Material: | Perforated Aluminum |
|
Adjustments: | Tweeter and midrange level (±3dB) |
|
Dimensions (Dia. x D): | 11¼" x 6" (286mm x 152mm) |
|
Cutout Diameter: | 101/8" (257mm) |
|
Shipping Weight: | 10 lbs. (4.5kg) Each |
|
V831SSDR
Tweeter: | Two ¾" (19mm) Silk domes, Ferrofluid cooled |
| |
Midrange: | Two 3" (76mm) Polypropylene cones, rubber |
| |
| surrounds |
| |
Woofer: | 8" (203mm) Polypropylene cone, dual voice |
| |
| coil, rubber surround, pivoting |
| |
Frequency Response: | 45Hz – 20kHz ±3dB |
| |
Impedance: | 8 ohms nominal; 6 ohms minimum |
| |
Power Handling: | 5 Watts minimum; 100 Watts maximum |
| |
Sensitivity: | 89dB SPL (2.83V 1 meter) | Virtuoso V831SSDR | |
Grille Material: | Perforated Aluminum | ||
| |||
Adjustments: | None |
| |
Dimensions (Dia. x D): | 11¼" x 6" (286mm x 152mm) |
| |
Cutout Diameter: | 101/8" (257mm) |
| |
Shipping Weight: | 8 lbs. (3.6kg) Each |
|
• Exclusive new FastMount® tabs hold speaker in the mounting |
hole during installation, allowing installer to let go of the speaker |
DIMENSIONS
11¼”
to |
• RotoLock® mounting system simplifies installation. |
• Paintable aluminum grilles. |
• Optional Retrofit Enclosure reduces sound spillover from rear of |
speaker into adjacent spaces. |
(all Virtuoso SSDR-Series speakers)
101/8”
6”
| Optional Accessories: | VirtuosoDR Retrofit Enclosure (part# 92243): Molded | ||
| Virtuoso | FlexBracket (part# 92247): Plastic template | ||
| DR |
| enclosure that reduces sound transmission into | |
212 Avenida Fabricante | to reserve a mounting hole for the speaker in new | |||
construction. Note: Not for use with Architectural | adjacent rooms and spaces. Can be used in both | |||
San Clemente, CA | ||||
Finish Installation Kits. | new construction and retrofit installations. | |||
(800) | Virtuoso | Coverplate (part# 92245): Covers the hole | VirtuosoDR | |
FAX: (949) | DR |
| ASTM E 119 and UL2043 criteria for commercial | |
made by the FlexBracket during construction until | ||||
Technical Support: (800) | the speaker is installed. | installations. | ||
w w w . s o n a n c e . c o m |
|
|
| |
|
|
|
®2006 Dana Innovations. Sonance, Virtuoso, Sonic Eye, RotoLock and FastMount are trademarks or registered trademarks of Dana Innovations. All Rights Reserved.
All features and specifications are subject to change without notice. For the latest Sonance product information go to w w w. s o n a n ce . co m
04/06