Sonance VP89R Painting The Grilles, Speaker Adjustments, Specifications, To Pivot the Tweeter

SONANCE VISUAL PERFORMANCE® 6” IN-CEILING

Painting The Grilles

Please refer to the accompanying Painting Instructions sheet for painting instructions.

Speaker Adjustments

Pivoting Woofer and Tweeter

All Visual Performance Series 6” in-ceiling speakers have a pivoting tweeter and all except the VP65RTL and VP65STL have a pivoting woofer assembly. These pivoting drivers allow you to direct sound towards or away from the listening area, depending on how the speakers are being used:

•If you’re using the speakers in stereo or as the front left/center/ right speakers in a home theater, pivot the woofer and/or tweeter directly towards the listening area. This will help the sound from the speakers blend into a solid soundstage even if the speakers are widely separated.

•If you’re using the speakers as surround channel speakers in a home theater, you can create a more diffuse, spacious surround effect by pivoting the woofer and/or tweeter towards a wall or window, away from the listeners.

To Pivot the Tweeter:

Apply light pressure to the plastic ring around the outside edge of the tweeter dome, as shown in Figure 7 (left). Take care not to touch or apply pressure to the tweeter dome itself.

To Pivot the Woofer:

Apply pressure on the outer edge of one of the tweeter support brackets, as shown in Figure 7, (right). Do not touch or apply pressure to the woofer cone.

Specifications

VP69R

Tweeter:	1" (25mm) Beryllium dome, Ferrofluid-
	cooled, pivoting, in acoustic back chamber
Woofer:	6½" (165mm) Beryllium cone with a rubber
	surround, pivoting
Frequency Response:	40Hz – 20kHz ±3dB
Impedance:	6 ohms nominal; 4 ohms minimum
Power Handling:	5 watts minimum; 150 watts maximum
Sensitivity:	90dB SPL (2.83V/1 meter)
Grille Material:	Perforated Steel
Dimensions (Dia. x D):	9¾" x 4¾" (248mm x 121mm)
Cutout Dimensions (Dia):	8 5/32" (207mm)
Shipping Weight:	12 lbs (5.45kg) pair

VP67R

Tweeter:	1" (25mm) Aluminum dome, Ferrofluid-
	cooled, pivoting, in acoustic back chamber
Woofer:	6½" (165mm) Coated carbon fiber cone with
	a rubber surround, pivoting
Frequency Response:	43Hz – 20kHz ±3dB
Impedance:	6 ohms nominal; 4 ohms minimum
Power Handling:	5 watts minimum; 140 watts maximum
Sensitivity:	90dB SPL (2.83V/1 meter)
Grille Material:	Perforated Steel
Dimensions (Dia. x D):	9¾" x 4¾" (248mm x 121mm)
Cutout Dimensions (Dia):	8 5/32" (207mm)
Shipping Weight:	11 lbs (5.0kg) pair

VP65R/VP65S/VP65RTL/VP65STL

FIGURE 7:PIVOTING THE TWEETER (LEFT) AND WOOFER (RIGHT)

Tweeter:

Woofer:

Frequency Response:

Impedance:

Power Handling:

Sensitivity:

Grille Material:

Dimensions

VP65R (Dia. x D):

VP65S (H x W x D):

VP65RTL (Dia. x D):

VP65STL (H x W x D):

Cutout Dimensions VP65R, VP65RTL (Dia): VP65S/VP65STL (W x H):

Shipping Weight:

1" (25mm) Silk dome, Ferrofluid-cooled, pivoting, in acoustic back chamber

6½" (165mm) Carbon fiber cone with a rubber surround, pivoting (VP65R, VP65S)

44Hz – 20kHz ±3dB

8 ohms nominal; 6 ohms minimum

5 watts minimum; 130 watts maximum 90dB SPL (2.83V/1 meter)

Perforated Steel

9¾" x 4¾" (248mm x 121mm)

9¾" x 9¾” x 413/16" (248mm x 248mm x 122mm)

9¾" x 3 1/32" (248mm x 77mm)

9¾" x 9¾” x 3 1/32" (248mm x 248mm x 77mm)

8 5/32" (207mm)

8 5/32" x 8 5/32" (207mm x 207mm) 10 lbs (4.5kg) pair

3