Sonic Blue DVP855 manual Accessories, Troubleshooting Guide, Install Batteries Remote

Accessories

Accessories

Troubleshooting Guide

Check the ollowing guide for the possible cause of a problem before contacting service.

Symptom	Cause	Correction
No power.	The power cord is disconnected.	Plug the power cord into the wall outlet
		securely.
The power is on,	No disc is inserted.	Insert a disc. (Check that the DVD or,
but the DVD player
does not work.		audio CD indicator in the DVD display is lit.)
No picture.	The TV is not set to receive DVD	Select the appropriatevideo input mode
	signal output	on the TV so the picture from the DVD
		player appears on the TV screen.

User's Manual

							POWER
							1	OPEN/
							2
						4	3	CLOSE
							5	ZOOM
						7	6
					PR	OGRAM	8	3D
							9
						0	DISPLAY
					SR		CLEAR
							SETUP
				MENU			SF
							TITLE
				ENTER
	REPEAT
AUDIO		SU
STEP/SL			BTITLE	R	EPEAT A _B
				MARK
OW	M	UTE
				GOTO
			DIGEST
				ANGLE

Remote controller

Batteries (2 AA size batteries)

1 Audio/video connection cable

	The video cable is not connected	Connect the video cable into the jacks
	securely.	securely.
	The connected TV power is turned off.	Turn on the TV.
No sound.	The equipment connected with the	Select the correct input mode of the
	audio cable is not set to receive DVD	audio receiver so you can listen to the
	signal output.	sound from the DVD player.
	The audio cables are not connected	Connect the audio cable into the jacks
	securely.	securely.
	The power of the equipment connected	Turn on the equipment connected with
	with the audio cable is turned off.	the audio cable.
	The digital Audio Output is set to the	Set the Digital Audio Output to the
	wrong position.	correct position, then turn on the DVD
		player again by pressing the POWER
		button.
The playback picture is poor.	The disc is dirty.	Clean the disc.
The DVD player	No disc is inserted.	Insert a disc.(Check that the DVD, or

Install Batteries in the

Remote

1	Remove the battery
	Compartment
2	cover
	Insert two 'AA' Alkaline batteries
	make sure that the batteries
	are inserted with their
	positive	and negative
	poles positioned correctly.

3 Close the cover until it clicks

If remote doesn't operate

properly:

Check the polarity + - of the batteries (Dry-Cell)

Check if the batteries are drained.

Check if remote sensor is blocked by obstacles.

Check if there is any fluorescent lighting nearby.

does not start		audio CD indicator in the DVD display is lit.)
playback.
	An unplayable disc is inserted.	Insert a playable disc.(Check the disc
		type, color system and Regional code.)
	The disc is placed upside down.	Place the disc with the playback side
		down.
	The disc is not placed within the guide.	Place the disc on the disc tray correctly
		inside the guide.
	The disc is dirty.	Clean the disc.
	A menu is on the TV screen.	Press the SETUP button to turn off the
		menu screen.
	The Rating level is set.	Cancel the Rating function or change
		the rating level.
The remote	The remote control is not pointed at the	Point the remote control at the remote
control does not	remote sensor of the DVD player.	sensor of the DVD player.
work properly.
	The remote control is too far from the	Operate the remote control within about
	DVD player.	23 ft (7m).
	There is an obstacle in the path of the	Remove the obstacle.
	remote control and the DVD player.
	The batteries in the remote control are	Replace the batteries with new ones.
	exhausted.

37 38