Connecting to an External Source |
| Connecting the Speakers |
|
|
|
The auxiliary input can be used to take advantage of the sound quality of your Executive Shelf System when listening to other sources.
| Examples: A television |
|
| ||
|
|
| A video disc player |
|
|
|
|
| A | ||
| To connect the external source, the source must have an audio out- | ||||
| put. In addition, you need an RCA connection cable. | ||||
|
|
|
|
| |
1 | Set the system to standby mode and disconnect it and the external | ||||
| source from the electrical outlet. |
|
| ||
2 | Connect the audio cable to the rear of the | ||||
| Executive Shelf System. |
|
| ||
| Connect the... |
| To the connector marked... | ||
|
|
|
|
|
|
| Red jack |
|
|
| R (right) |
|
|
| |||
| White jack |
|
| L (left) | |
|
|
|
For optimum sound quality, do not invert the right and left channels.
3 | Plug the system back into the electrical outlet and press ( | ) to |
| switch it on. |
|
4 | Select the AUX source by pressing AUX. |
|
| Result: AUX is displayed. |
|
5 | Switch the external source on. |
|
6 | Adjust the volume and balance as required: |
|
Volume Equalizer S.Bass
Example: You can watch a film and take advantage of stereo sound, provided that the original soundtrack is in stereo.
The System has Main Speaker jacks and Subwoofer Speaker jacks.
Main Speaker Connection: Connect the Main Speaker cords (red/black) to the Main Speaker jacks of the System
Subwoofer Speaker Connection: Connect the Subwoofer Speaker cords (blue/black) to the Subwoofer Speaker jacks of the System
(Right Speaker) | (Left Speaker) |
For Best Results when Installing Speakers
Installation near heat sources, in direct sunlight, or in an environ- ment with high humidity may cause performance degradation of the speaker.
Do not install speakers on a wall or in any unstable place to pre- vent the speakers from potentially falling.
Placing speakers near the TV or computer monitor may influence the quality of the screen display.
8