Sonic Blue EX1000 manual Programming the Order of Playback, Checking or Changing Programmed Tracks

Programming the Order of Playback

*This function does not operate while using an MP3-CD.

You can decide:

the play order of the tracks to skip certain tracks

The play order of up to 24 may be programmed.

1	If the CD function is selected, stop the player by pressing	.
2	Load the selected CD.
3	Press Program/Set.
	Result: The following indications are displayed:

(01 = Program no., – – = Track no. on the disc)

4	Select the required track by pressing:
	to move back through the tracks
	to move forward through the tracks
5	Press Program/Set to confirm your selection.
	Result: The selection is stored and is displayed.
6	To select other tracks, repeat Steps 3-5.
7	Press CD (	) to listen to the tracks in the order programmed.
8
	To...			Press...
	Listen to the current track again				once
	Listen to the previous track				twice
	Listen to the next track				once
	Skip forwards or backwards				or	the appropriate
				number of times
9	To cancel the selection, press		.
	Press	once if the compact disc player is stopped.
	Result: PRGM is no longer displayed.

If you open the disc compartment, the selection is cancelled.

1, 9

3,5 7

4,84,8

Checking or Changing Programmed Tracks

You can check or change your selection of programmed tracks at any time.

1	Press	once if you have started listening to the selection.
2	Press Program/Set.
	Result: The following is displayed:

(01 = Program no., – – = Track no. on the disc)

If you have already programmed 24 tracks, Check is displayed instead of PR when you press Program/Set.

3	Press Program/Set one or more times until the track to be changed
	is displayed.
4	Press	/		or turn Multi Jog to select a different track.
5	Press Program/Set to confirm your change.
6	Press CD (		) to start listening to the selection.
	Result: The first track selected is played.

4

4

1

4

1

2,3,5 6

44

14