Sonicare HX4872 manual Smartimer\ 2-minute timer

4235 020 00392 16-12-2005 08:51 Pagina 9

ENGLISH 9

1

2

4 3

C

C

3Press and hold the power button for 5 seconds.You will hear

1beep if the Easy-start feature is off. If you hear 2 beeps, Easy-start is active (on).

Using the Easy-start feature beyond the initial ramp-up period is not recommended and reduces Sonicare's effectiveness in removing plaque.

The Easy-start feature should be deactivated when Sonicare is used in clinical trials.

Smartimer\ 2-minute timer

◗All Sonicare models come with the Smartimer feature, which automatically sets the brushing time to the 2 minutes recommended by dental professionals.

◗If you wish to pause or stop brushing during your 2-minute cycle, press the power button. Press the power button again and the Smartimer will pick up where you left off.

◗The Smartimer will automatically reset to the beginning of a

2-minute cycle if:

-brushing is paused for 30 seconds or longer;

-the handle is returned to the charger base.

Quadpacer\ 30-second interval timer (available on select models).

◗Quadpacer makes sure that you brush all sections of your mouth evenly and thoroughly.At 30, 60 and 90 seconds, you will hear a short beep and a pause in brushing action.This is your signal to move to the next section of your mouth.

Recharge indicator battery charge status (available on select models).

◗If your Sonicare has a low charge, you will hear 5 beeps after you have brushed your teeth for 2 minutes and the power button light will flash rapidly.

When you hear the low charge indication, you have 3 or fewer 2-minute brushings left.

1Place the handle in the charger base (with the Sonicare logo facing towards you) to begin the recharging process.

◗The power button light flashes slowly when the handle is in the charger base to signal charging is in progress.