6. LAN Settings - The LAN Settings screen configures your LAN interface.
SonicWALL LAN | Accept the default IP address or enter a new IP address of the | |||
IP Address | LAN interface. Record the address: |
| . | |
|
|
|
|
|
LAN Subnet Mask | Accept the default, or enter a subnet mask for your LAN. |
|
| |
|
|
|
| |
Enable | Leave this option checked if you plan to have more than one |
|
| |
Windows Networking | Windows computer on your network. Windows Networking has | |||
Support | no effect on computers with other operating systems. |
|
| |
|
|
|
|
|
By default, your SonicWALL TZ 170 Wireless is configured with a LAN network IP address, 192.168.168.168, and subnet mask, 255.255.255.0, which will work well for most installations. In most cases, leave the default LAN IP address and subnet mask unchanged.
Note: The LAN IP address is the address you will use to access the SonicWALL TZ 170 Wireless management interface.
Click Next.
7.LAN DHCP Settings - The LAN DHCP Settings screen allows you to select whether or not to use the DHCP server in the SonicWALL TZ 170 Wireless to automatically distribute IP addressing information to computers and other network devices on your LAN.
Enable DHCP Server | Leave this checkbox checked to use the DHCP server in the |
on LAN | SonicWALL TZ 170 Wireless security appliance. |
| Do not select this option if you already have a DHCP server on |
| your network, or if you want to require your network clients to |
| have static IP addresses. |
|
|
LAN Address Range | If you enabled the DHCP Server, enter a range of IP addresses in |
| the same subnet as the LAN IP address, or leave the default |
| range unchanged. The default DHCP range will work for most |
| installations. |
|
|
Click Next.
SonicWALL TZ 170 Wireless Getting Started Guide | Page 15 |
