Connecting the Ethernet Cables
1.Connect one end of the Ethernet cable connected to your internal network (your LAN hub, switch, or router) to the X0 (Internal) port of the SonicWALL CSM.
The LEDs on the X0 port light up indicating an active connection.
2.Connect one end of an Ethernet cable connected to your firewall or Internet connection to the X1 (External) port of the SonicWALL CSM.
The LEDs on the X1 port light up indicating an active connection.
Testing Your Connectivity
1.Open a Web browser and log into the CSM management interface by typing the IP address you assigned to the SonicWALL CSM appliance in the Address or Location bar.
2.In the
3.Under Network Settings, click Run Test.
4.The test may take up to two minutes before the results display.
SonicWALL CSM Series Appliance Getting Started Guide | Page 15 |
