Preparing the SonicWALL ADConnector Configuration Tool for First Use
1.Expand the Users list to view the users.
2.The first time you click on a user, the SonicWALL ADConnector prompts you for the Active Directory attributes for the SonicWALL ADConnector. Click OK in the Warning dialog box.
3.In the Attribute Selection dialog box, select attributes that are otherwise unused in on the system, for example, IP Phone. Select different attributes for the Category Set. Once the attributes have been selected, filtering policies for AD Category Sets can now be managed.
Configuring the SonicWALL CSM for Microsoft Active Directory
1.In the SonicWALL CSM management interface, select Users and Hosts > Settings.
2.In the Authentication Method section, select Use Directory Services Connector and click the Configure button. The SonicWALL Directory Services Connector Configuration window is displayed.
3.Enter the IP address of the computer/server running the Directory Services Connector in the IP Address field.
4.Enter a port number in the Port Number field.
5.In the Shared Secret field, enter the same as the shared key you configured for the SonicWALL ADConnector when you installed it. The shared secret must be a
6.Click OK to apply the configuration.
7.In the Users and Hosts > Settings page, click Configure for Directory Services Connector again.
SonicWALL CSM Series Appliance Getting Started Guide | Page 29 |
