Sonic OS 2.x Quick Start Guide
8.For the Remote IKE ID, select Sonicwall Identifier and enter the serial number of the Pro 4060.
9.Select the Network Tab.
10.For the Local Network, choose LAN Primary Subnet. This is a
11.For Destination Networks, select the previously defined address object for the network located behind the Pro 4060 (192.168.168.0/24)
12.Select the Proposal tab.
13.For Exchange, select Aggressive Mode. Remember, the TZ170 receives a dynamic IP address from the ISP.
14.Select the rest of the Phase 1 and 2 proposal settings as required. Ensure they match up with the settings you’ve made on the Pro 4060.
15.Select the Advanced tab.
16.Check (turn on) the Enable Keep Alive option. This will keep the tunnel active and will renegotiate the tunnel if the WAN IP of the TZ170 changes.
17.Click OK.
18.You should now be able to communicate between the two Sonicwalls via the VPN.
15