Sonic OS 2.x Quick Start Guide
9.For Translated Destination, select Original. We want the traffic to still go to its original destination.
10.For Original Service, select ANY. Leave the service as the original service.
11.For Translated Service, select Original. Again, we want the traffic to go to its original destination, via its original service (protocol).
12.For Inbound Interface, select ANY or you could select the X0 LAN interface only.
13.For Outbound Interface, select X2. NAT all outbound traffic to the IP of the X2 Secondary
WAN IP.
14.Click OK to add the NAT policy.
With the addition of the new NAT rule, any load balanced traffic going out through the X2 Secondary WAN link is NAT’ed to its IP address.
19
