SonicWALLSSL-VPN 2000 Getting Started Guide Page 37
If you are allowing HTTP access to the SonicWALL SSL-VPN appliance, create a public
server access rule for HTTP:
1. In the Firewall > Access Rules page, click .
2. In the Welcome to the Network Access Rules Wizard page, click Next.
3. In the Step 1: Access Rule Type page, select Public Server Rule. Click Next.
4. In the Step 2: Public Server page, perform the following selections and click Next:
5. In the Congratulations page, click Apply to create the rules and allow access from
the WAN to the SonicWALL SSL-VPN appliance on the DMZ.
Scenario B: Allowing DMZ -> LAN Connection in SonicOS Standard
When users have connected to the SSL-VPN, they need to be able to connect to
resources on the LAN. You need to create two rules--one to allow traffic from the
SonicWALL SSL-VPN appliance’s X0 interface to your LAN, and one to allow traffic from
NetExtender to your LAN.
Note: This procedure uses the Access Rule Wizard to create the rules. You can add
the rules manually by clicking Add at the bottom of the Firewall > Access Rules page.
Create access to the LAN for the SSL-VPN X0 interface:
1. In the Firewall > Access Rules page, click .
2. In the Welcome to the SonicWALL Network Access Rules Wizard page,
click Next.
3. In the Step 1: Access Rule Type page, select General Rule. Click Next.
4. In the Step 2: Access Rule Service page, select Any. Click Next.
5. In the Step 3: Access Rule Action page, perform the following selections and then
click Next:
Service Web (HTTP)
Server IP Address The X0 IP address of the SonicWALL SSL-VPN appliance
within your DMZ range, for example 10.1.1.200.
Destination Interface DMZ
Select Action for this
Rule Allow
TCP Connection
Inactivity Timeout 30 minutes