SonicWALL TZ 170 SP Wireless Security Appliance Regulatory Statement and Safety Instructions
Regulatory Model/Type | Product Name |
|
|
SonicWALL TZ 170 SP Wireless | |
|
|
Note: Detailed regulatory information can be found in the electronic file, “SonicWALL_Products_Regulatory_Statement.pdf,” located on the SonicWALL Resource CD provided with the unit.
Power Supply Information Models APL14-034
If you need to order a power supply for your SonicWALL TZ 170 SP Wireless, contact SonicWALL Technical Support at
This product should only be used with a UL listed power supply marked “Class 2” or “LPS”, with an output rated 5 VDC, minimum 2.4 A.
Considerations for Mounting the APL14-034
•Consideration must be given to the connection of the equipment to the supply circuit and the effect of overloading the circuits has minimal impact on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings must be used when addressing this concern.
•A power cord is included only with units shipped to North America.
•Mount in a location away from direct sunlight and sources of heat. A maximum ambient temperature of 104º F (40º C) is recommended.
•Route cables away from power lines, fluorescent lighting fixtures, and sources of noise such as radios, transmitters, and broadband amplifiers.
•Ensure that no water or excessive moisture can enter the unit.
•Allow unrestricted airflow around the unit and through the vents on the side of the unit. A minimum of 1 inch (25.44mm) clearance is recommended.
North American Authorized Channels
SonicWALL declares that the
SonicWALL TZ 170 SP Wireless Getting Started Guide | Page 37 |
