SonicWALL TZ 170 SP manual Dhcp, PPPoE, Pptp, WAN Network Mode NAT with DHCP Client

DHCP

The Setup Wizard screen should display:

WAN Network Mode: NAT with DHCP Client

If you selected DHCP, you do not need to enter any WAN networking settings. The network settings are provisioned automatically from a DHCP server.

Click Next.

PPPoE

The Setup Wizard screen should display:

WAN Network Mode - NAT with PPPoE Client

Obtain an IP Address	Select this if your ISP assigns you a dynamic IP address.
Automatically
Use the following	Select this if your ISP has assigned you a static IP address, and
IP Address	enter the address.
PPPoE User Name	Enter the user name for your Internet account. Your ISP may
	require you to enter your username in e-mail address format,
	including “@” and the domain name, for example,
	joe.user@sonicwall.com.
PPPoE Password	Enter the password for your Internet account.
Inactivity Disconnect	Check this box if you want the SonicWALL TZ 170 SP Wireless
(minutes)	to disconnect from the Internet if there is no traffic for the number
	of minutes you enter.

Click Next.

PPTP

The Setup Wizard screen should display:

WAN Network Mode - NAT with PPTP Client

PPTP Server IP	Enter the address of the PPTP server.
Address
PPTP User Name	Enter your network user name.
PPTP Password	Enter your network password.
Obtain an IP Address	Select this if the server assigns you a dynamic IP address.
Automatically
Use the following	Check this if you have been given a static IP address, and fill in
IP Address	the following three fields.
SonicWALL WAN	Enter the static IP address for your connection.
IP Address

Page 14