Applying Power
Plug the power supply into the back of the SonicWALL security appliance | and into an |
appropriate power outlet. |
|
Alert: Only use a
The Power LED 
on the front panel lights up green when you plug in the power supply. The Test LED 
lights up and may blink while the SonicWALL TZ 170 SP Wireless performs a series of diagnostic tests. When the Test light is no longer lit, the SonicWALL security appliance is ready.
If the Test LED remains lit, restart the SonicWALL security appliance.
For more trouble shooting information, refer to the SonicOS Enhanced Administrator’s Guide.
Applying Power with the SonicWALL Power over Ethernet (PoE) Injector
The SonicWALL TZ 170 SP Wireless can use a regular power supply, or it can get power through the LAN 1 Ethernet port using the an 802.3af standard PoE injector, like the SonicWALL PoE Injector. To apply power with the PoE injector:
1.Plug the power cord of the PoE injector into the power outlet.
2.Connect an Ethernet cable to the Data and Power out port on the PoE Injector and connect the other end of the cable to the LAN 1 port on the back of your SonicWALL TZ 170 SP Wireless.
Alert: The PoE Injector Ethernet cable must be inserted into the LAN 1 port only to power the SonicWALL TZ 170 SP Wireless
To power source
| Ethernet cable | |
|
| LAN 1 |
Data and |
| Data in |
Power out |
|
|
|
|
|
SonicWALL
PoE Injector
To LAN
SonicWALL TZ 170 SP Wireless Getting Started Guide | Page 7 |
