Ricoh 3506 manual Starting the Machine, When the machine is set for user codes

Models: 3506

1 182
Download 182 pages 28.99 Kb
Page 26
Image 26

Basics

Starting the Machine

A Press the operation switch to make the On indicator go on.

1

Note

If the power is not turned on when the operation switch is pressed, check if the main power switch is on. If off, turn it on.

During the warm-up period (Less than 270 seconds), you can use the Auto Start function. ⇒ P.54 “Auto Start”.

When the machine is set for user codes

A Enter your user code using the number keys. Then press the {#} key.

Note

To prevent others from making copies with your user code, press the {Clear Modes} key and the {Clear/Stop} key simultaneously after copying.

Reference

For more about user codes ⇒ P.140 “General features”.

When the Energy Saver indicator is lit

The machine is in Energy Saver mode.

A Press any key.

The machine will return to the ready condition.

Note

The machine will also return to the ready condition when an original is set in the document feeder, or when the platen cover or the document feeder is opened.

14

Page 26
Image 26
Ricoh 3506 manual Starting the Machine, When the machine is set for user codes, When the Energy Saver indicator is lit