Ricoh 3506 manual 136, Default 60 minutes

6

Changing the Machine's Settings

Menu	Description
Function Reset	You can set the function switching time when "Interleave
	Print" is Off.
	When a print job comes while the machine is copying, after fin-
	ishing the copy job the machine will wait for a specified time
	before starting the print job.
	You can set this time from 10 to 990 seconds (in 10 seconds
	steps) or off.
	A Select [On] or [Off] with the <> keys.
	B When you select [On], enter the time with the number keys.
	Then press the [OK] key.

	Note
	❒ Default: On (60 seconds)
Control Panel Off	The machine enters Energy Saver mode automatically after
	your job is finished, after the selected time. The time can be set
	from 10 to 990 seconds (in 10 seconds steps), or off. In Energy
	Saver mode, the panel display turns off.
	A Select [On] or [Off] with the <> keys.
	B When you select [On], enter the time with the number keys.
	Then press the [OK] key.

	Note
	❒ Default: On (60 seconds)
Auto Timer	The machine turns itself off automatically to conserve energy
	after your job is finished, after the selected time. This function
	called “Auto Off”. The time can be set from 1 to 240 minutes.

Note

❒Default: 60 minutes

Tray Paper Size Select the size of the copy paper set in the paper tray.

Note

❒If the specified paper size differs from the size of paper ac- tually set in the paper tray, a paper misfeed might occur be- cause the paper size is not detected correctly.

Reference

For details, ⇒ P.131 “To Adjust the Paper Size with the User

Tools”.

136