6
Changing the Machine's Settings
Menu | Description |
|
|
Set User Ratio | Up to 2 reproduction ratios which you frequently use can be |
| registered. |
| A Select [Ratio1] or [Ratio 2] with the <> keys. |
| B Enter the ratio with the number keys. Then press the [OK] |
| key. |
| Note |
| ❒ Default: 100 % |
|
|
Initial Mode Set | You can set the machine to recall program setting when the |
| machine is turned on or when modes are cleared. |
Note
❒Default: Normal
❒Your service representative can store the program setting.
❒Your service representative can select whether the program setting is recalled when the machine is turned on or when modes are cleared.
Key Operator Tools
Use these tools to manage use of the machine.
Note
❒Enter a previously registered key operator code with the number keys.
Accessible Modes | You can assign user codes to each color mode. Operators must |
| input their user codes before using each color mode (Full |
| Color, Black, Single Color, and Twin Color). The machine |
| keeps count of the number of copies made under each user |
| code. |
| A Select the color mode with the <> keys. |
| B Press the [Select] key. |
| C Press the [Exit] key. |
| Note |
| ❒ Repeat steps A and B until you finished designating color |
| modes. |
|
|
Counter Reset | You can check the number of copies made using each user |
| code. Also, you can clear each code's counter. |
| A Input the user code with the number keys. |
| B Press the [OK] key. |
Note
❒ To clear the counter, press the [Reset] key. Then press the [Yes] key.
C Press the [Exit] key.
