Setting one Original at a Time in the Document Feeder
Setting one Original at a Time in the Document Feeder
If you set one original at a time in the document feeder, the second and subse- | 1 |
quent originals can be fed and copied automatically without pressing the {Start} key.
Note
❒Do not press down or hold originals after inserting them.
❒While originals are fed from the original table to the exposure glass, do not pull them out.
❒Do not lift the document feeder until the original has been completely fed out.
A Correct any curl, fold, or crease in the originals before setting them.
B Make sure the Insert Original indicator is lit and the exposure glass is clear of originals.
C Adjust the guide to the original size.
D Set the original face up into the document feeder until the Insert Original indicator goes off.
Note
❒If you are copying a stack of originals one sheet at a time and you want to keep them in order, start with the last page of the originals.
❒The original guide must touch the front side of the original.
E Press the {Start} key.
21
