Setting Originals of Different Sizes in the Document Feeder
Setting Originals of Different Sizes in the Document Feeder
Preparation | 1 |
|
To use this function, you have to select ADF Mixed Sizes mode with the user tools. ⇒ P.146 “ADF/Sorter”.
You can insert a stack of originals of different standard sizes (e.g. A4, B5 etc.) into the document feeder. These originals are individually fed onto and removed from the exposure glass.
Limitation
❒The weight of originals that can be set with this function is 52 - 81g/m2, 14 - 20 lb.
❒Smaller size originals might be skewed a little.
Note
❒If your stack of originals contains pages of different sizes, make sure that:
•Longer originals are at the bottom of the stack, and shorter originals are at the top.
•All originals are flush with the back fence of the document feeder.
A Align the rear and left edges of the originals as shown in the illustration.
1.Document feeder feed direction
2.Vertical size
B Adjust the guide to the widest original size.
C Set the aligned originals face up into the document feeder.
23
