Ricoh 3506 manual If Your Machine Does Not Operate as You Want, 111

5.What to Do If Something Goes Wrong

If Your Machine Does Not Operate as You Want

Check the following:

Condition	Action
Nothing happens when	Is the main power switch turned on?
the operation switch is	→ Turn on the main power switch.
turned on.
B Paper tray is empty.	Load paper. ⇒ P.115 “B Loading Paper”.
D Toner container is al-	Add toner. ⇒ P.117 “D Changing The Toner Cartridge”.
most empty. Or toner con-
tainer is empty.
M Doors/covers are open.	Close the doors/covers.
x Misfeed occurs.	Remove misfed paper. ⇒ P.122 “x Clearing Misfeeds”.
d The machine instructs	Add staples. ⇒ P.125 “d Adding Staples”.
you to add staples.
The machine instructs you	The machine is set for user code mode. Enter your user code. ⇒
to enter your user code.	P.14 “When the machine is set for user codes”.
The Energy Saver indica-	Your machine is in Energy Saver mode.
tor is on.	→ Press the {Energy Saver} key. ⇒ P.52 “Energy Saver Mode”.
Misfeeds occur frequently.	Is the right kind of paper in the paper tray?
	→ Paper size and weight must be within the specifications for this
	machine.
	Is folded, wrinkled, damp, or curled paper in the paper tray?
	→ Always use dry, undamaged paper.
	Is the paper properly set in the paper tray?
	→ Always load paper correctly.
	Are there any pieces of misfed paper or other foreign objects in the
	machine?
	→ Make sure that the paper path is completely clear of paper and
	other material after a misfeed.
Staples do not come out at	There are jammed staples in the stapler.
all.	→ Remove the jammed staples. ⇒ P.127 “eRemoving Jammed Sta-
	ples”.
	After loading a new staple cartridge, staples might not be ejected
	the first few times you try to use the stapler.
E or H or L is lit.	Contact your service representative.

If you cannot correct the problem by taking the above actions, please contact
your service representative.	111