7. Others
Do's and Don'ts
RCAUTION:
•Unplug the power cord from the wall outlet before you move the equipment. While moving the equipment, you should take care that the power cord will not be damaged under the equipment.
•When you use this equipment for a long time in a confined space without good ventilation, you may detect an odd smell. To keep the workplace com- fortable, we recommend you keep it well ventilated.
•Do not press areas on or around the fusing unit. These areas get hot.
•After making copies continuously, the exposure glass may feel warm — this is not a malfunction.
•You might feel warm around the ventilation hole. This is caused by exhaust air, and not a malfunction.
•Do not turn off the operation switch while copying or printing. Make sure that all copying or printing has finished.
•The machine might fail to produce good copy images if there should occur condensation inside caused by temperature change.
•Do not open the covers of machine while copying or printing. If you do, mis- feeds might occur.
•Do not move the machine while copying or printing.
•If you operate the machine improperly or a failure occurs on the machine, your machine settings might be lost. Be sure to take a note of your machine settings.
•Supplier shall not be liable for any loss or damages resulting from a failure on the machine, loss of machine settings, and use of the machine.
