Ricoh 3506 manual System settings, 135

User Tools

Settings You Can Change with the User Tools (System Settings)

Reference

For how to access the user tools, ⇒ P.133 “Accessing the User Tools”.

System settings

Menu	Description
Panel Tone	The beeper (key tone) sounds when a key is pressed. This beep-
	er can be turned on or off.

	Note
	❒ Default: On
Ready/Tone	Choose whether the machine beeps when it becomes ready for
	a copy run after power up.

	Note
	❒ Default: On
	❒ When the “Panel Tone” is set to Off, the beeper does not
	sound even if the “Ready/Tone” is set to On.
Copy Count Display	The copy counter can be set to show the number of copies
	made (Count Up), or the number of copies remaining to be
	made (Count Down).

	Note
	❒ Default: Count Up
System Reset	You can set the reset time of the machine.
	After a copy job in Interrupt or Sort/Stack/Staple mode is
	completed, the mode will not be reset if there is still paper in
	the sorter or originals in the document feeder. A print job can-
	not be started in this condition. When the system is reset by
	this user tool, the machine can start printing.

You can set this reset time from 10 to 990 seconds (in 10 sec- onds steps) or off.

ASelect [On] or [Off] with the <> keys.

BWhen you select [On], enter the system reset time with the number keys. Then press the [OK] key.

Note

❒Default: On (60 seconds)

6

135