Enclosure Setup

2.Connect the data cables’ remaining connectors to the mini-SAS ports on the Sonnet RAID controller card; verify the connectors are plugged in securely (Figure 11).

3.Connect the supplied power cables between the Fusion RX1600RAID enclosure and a grounded wall outlet or power strip; verify the cables are plugged in securely.

mini-SAS

 

 

 

mini-SAS

connector

 

 

 

connector

4.Push the power switch on the front of the enclosure, and then power on your computer.

Figure 11

How to Connect Fusion RX1600RAID Expansion Systems

This section explains how to connect Fusion RX1600RAID Expansion

Systems to your system. Perform all steps listed here with your computer and Fusion storage systems powered off.

1.Perform all of the steps from sections A – D with the Fusion RX1600 Expansion system.

2.Connect the included mini-SAS to mini-SAS data cables between the expansion (EXP LNK) mini-SAS ports on the Fusion RX1600RAID enclosure the primary (PRM LNK) mini-SAS ports on the RX1600 Expansion system.

3.You may additional RX1600 Expansion systems by connecting data cables from one enclosure’s expansion ports to another enclosure’s primary ports.

6