Step 2: Charging the battery pack

4

5

/CHG

 

 

(charge) lamp

 

 

 

3

 

5

 

 

Battery pack

 

 

1

 

 

DC IN jack

2

POWER switch

 

DC plug

 

To the wall outlet

 

 

(wall socket)
AC Adaptor

 

 

Power cord (Mains lead)

You can charge the “InfoLITHIUM” battery pack (H series) (p. 101) after attaching it to your camcorder.

bNotes

4 Attach the battery pack by sliding it in the direction of the arrow until it clicks.

•You cannot attach any “InfoLITHIUM” battery pack other than the H series to your camcorder.

1 Connect the AC Adaptor to the DC IN jack on the Handycam Station.Be sure that the v mark on the DC plug is facing up.

2 Connect the power cord (mains lead) to the AC Adaptor and the wall outlet (wall socket).

3 Turn the POWER switch in the direction of the arrow to OFF (CHG) (the default setting).

5 Insert the camcorder into the Handycam Station securely, all the way to the bottom.

The/CHG (charge) lamp lights up and charging starts. When the /CHG (charge) lamp turns off, the battery is fully charged.

bNotes

•When inserting the camcorder into the Handycam Station, close the DC IN jack cover.

16