Self-diagnosis display/Warning indicatorsIf indicators appear on the LCD screen, check the following.

If the problem persists even after you have tried to fix a couple of times, contact your Sony dealer or local authorized Sony service facility.

C:04:00

C:(or E:) ss:ss (Self-diagnosis display)C:04:ss

•The battery pack is not an “InfoLITHIUM” battery pack (H series). Use an “InfoLITHIUM” battery pack (H series) (p.101).

•Connect the DC plug of the AC Adaptor to the DC IN jack of the Handycam Station or your camcorder securely (p.16).

C:13:ss / C:32:ss

•Remove the power source. Reconnect it and operate your camcorder again.

E:20:ss / E:31:ss / E:61:ss /E:62:ss / E:91:ss / E:94:ss

•A malfunction that you cannot service has occurred. Contact your Sony dealer or local authorized Sony service facility. Inform them of the 5-digit code, which starts from “E”.

101-0001 (Warning indicator pertaining to files)Slow flashing

•The file is damaged.

•The file is unreadable.

(Warning on the hard disk of the camcorder)*Fast flashing

•An error may have occurred with the hard disk drive in your camcorder.

(Warning on the hard disk of the camcorder)*

Fast flashing

•The hard disk of the camcorder is full.

•An error may have occurred with the hard disk drive in your camcorder.

E(Battery level warning)

Slow flashing

•The battery pack is nearly used up.

•Depending on the operating environment or battery conditions, E may flash, even if there are approximately 20 minutes remaining.

(High temperature warning)

Slow flashing

•The temperature of your camcorder is getting higher. Turn off your camcorder and leave it for a while in a cool place.

Fast flashing*

•The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place.

(Low temperature warning)* Fast flashing

•The temperature of your camcorder is extremely low. Make the camcorder warm.

Troubleshooting

93