Viewing Pictures from Connected Equipment

Turn on the connected equipment, and perform one of the following operations.

For equipment connected to the scart sockets using a fully-wired 21-pin scart lead

Start playback on the connected equipment. The picture from the connected equipment appears on the screen.

For an auto-tuned recorder

In analogue mode, press PROG +/– or the number buttons, to select the video channel.

For other connected equipment

Press to display a list of connected equipment. Press F/f to select the desired input source, then press .

The highlighted item is automatically selected if you do not perform any operation for two seconds after pressing F/f.

If you have set an input source to “Skip” in the “AV Preset” menu (page 30), that input source does not appear in the list.

z

•To return to normal TV mode, press DIGITAL or
ANALOG.
To view two pictures simultaneously
– PAP (Picture and Picture)

You can view two pictures (external input and TV programme) on the screen simultaneously. Connect an optional equipment (page 21), and make sure that images from the equipment appear on the screen (page 23).

~

•This function is not available for a PC input source.•You cannot change the size of the pictures.

•The analogue TV video in the TV programme picture will not appear while displaying AV1, AV2 or AV3 in the external input picture. However, you can hear the analogue video’s sound.

1Press TOOLS.2Press F/f to select “PAP”, then press .

The picture from the connected equipment is displayed on the left, and the TV programme is displayed on the right.

3Press the number buttons or PROG +/– to select the TV channel.
To return to single picture mode
Press or RETURN.

z

•The picture framed in green is audible. You can switch the audible picture by pressing G/g.

To view two pictures simultaneously

– PIP (Picture in Picture)

You can view two pictures (PC input and TV programme) on the screen simultaneously. Connect a PC (page 21), and make sure that images from the PC appear on the screen.

~

•“Power Management” (page 29) is not available in PIP mode.

1Press TOOLS.

2Press F/f to select “PIP”, then press .

The picture from the connected PC is displayed in full size, and the TV programme is displayed in the small screen.

You can use F/f/G/g to change the position of the TV programme screen.

3Press the number buttons or PROG +/– to select a TV channel.

To return to single picture mode

Press RETURN.

z

•You can switch the audible picture by selecting “Audio Swap” from the Tools menu.

Equipment Optional Using

23 GB