ConditionExplanation/Solution
SoundThe picture is good, but there is no sound.
•Press 2 +/– or % (Mute).
•Check if the “Speaker” is set to “TV Speaker” (page 30).
•When using HDMI input with Super Audio CD or
| You cannot select your desired | • Switch between digital and analogue mode, and select the desired |
| channel. | digital/analogue channel. |
|
|
|
| Some channels are blank. | • The channel is for scrambled/subscription service only. Subscribe to a |
|
| pay TV service. |
|
| • The channel is used only for data (no picture or sound). |
|
| • Contact the broadcaster for transmission details. |
|
|
|
| You cannot view digital | • Contact a local installer to find out if digital transmissions are provided |
| channels. | in your area. |
|
| • Upgrade to a higher gain aerial. |
|
|
|
| General |
| |
|
|
|
The TV turns off automatically (the TV enters standby mode).
•Check if the “Sleep Timer” is activated, or confirm the “Duration” setting of “On Timer Settings” (page 28).
•If no signal is received and no operation is performed in the TV mode for 10 minutes, the TV automatically switches to standby mode.
The TV turns on | • Check if the “On Timer Settings” is activated (page 28). |
automatically. |
|
Some input sources cannot be selected.
•Select “AV Preset” and cancel the “Skip” setting for the input source (page 30).
The remote does not function. • Replace the batteries.
You cannot add a channel to | • Up to 999 channels can be stored in the Favourite list. |
the Favourite list. |
|
|
|
HDMI equipment does not | • Check that your equipment is compatible with control for HDMI. |
appear on “HDMI Device |
|
List”. |
|
You cannot select “Off” in “Control for HDMI”.
•If you have connected any audio system that is compatible with control for HDMI, you cannot select “Off” in this menu. If you want to change the audio output to the TV speaker, select “TV Speaker” in the “Speaker” menu (page 30).
Not all channels are tuned for cable.
•Check the support website for cable provide information.