4:Connecting the mains lead

~

• Make sure to secure the mains lead.

• To ensure compliance with current EMC legislation, ensure the following conditions are met.

• Fix the mains lead holder (supplied) after checking the mains lead is in the groove of the mains lead holder (supplied) to avoid scratching the mains lead.

1

AC

IN

Monitor

to mains socket

23 Screws (supplied)

Mains lead holder (supplied)

 

C

IN

18V

D

 

 

 

 

 

 

Media receiver

to mains socket

5:Performing the initial set- up

Inserting batteries into the remote

Push and lift the cover to open.

~

•Observe the correct polarity when inserting batteries.

•Do not use different types of batteries together or mix old and new batteries.

•Dispose of batteries in an environmentally friendly way. Certain regions may regulate the disposal of batteries. Please consult your local authority.

•Handle the remote with care. Do not drop or step on it, or spill liquid of any kind onto it.

•Do not place the remote in a location near a heat source, a place subject to direct sunlight, or a damp room.

Establishing the wireless communication between the unit

~

•Keep about 30 cm to 20 m distance between the monitor and media receiver when installing.

•Keep clear the area between the monitor and media receiver. Otherwise the picture may deteriorate.

•Rearrange the installation position of the monitor and media receiver in case of fuzzy picture.

•Do not place either unit on a metallic rack.

•Do not use two units or more at the same time in an area of radio interference.

1Press 1 to turn on the unit power.

POWER button

Media receiver

6 GB