The CONTROL FOR HDMI function does not work.
,Make sure that the connected component is compatible with the CONTROL FOR HDMI function. Please refer to the operating instructions of the component for detailed explanation.
,Make sure that the TV’s input is switched to DVD player so that the signal from the player appears on the TV screen, and “CONTROL FOR HDMI” is set to “ON” (page 41).
‘BRAVIA Sync’ display does not appear.
,Turn off any display of the DVD player displays. Then, try again.
,Please return to the one screen mode if your TV is in two screen mode. Then, try again.
Your TV automatically turns on or the TV’s input is switched to the player.
,“CONTROL FOR HDMI” is set to “ON” (page 41). Switch this function to “OFF”.
Display language on the screen switches automatically.
,When “LANGUAGE FOLLOW” is set to “ON” in the “HDMI SETUP” (page 41), the display language on the screen automatically switches, according to the language setting of the connected TV, if you change the language settings on your TV, etc.
USB
The player does not detect a USB device connected to the player.
,The USB device is not securely connected to the player (page 18).
,The USB device or a cord is damaged.
,Disc mode has not been switched to USB mode.
,Compatibility with all encoding/writing softwares, recording devices, and recording media cannot be guaranteed. Incompatible USB device may produce noise or interrupted audio or may not play at all.
Self-diagnosis Function
(When letters/numbers appear on the
screen)
When the
First three | Cause and/or corrective |
characters of | action |
the service |
|
number |
|
|
|
C 13 | The disc is dirty or recorded |
| in a format that this player |
| cannot play (page 45). |
| , Clean the disc with a |
| cleaning cloth or check its |
| format. |
|
|
C 31 | The disc is not inserted |
| correctly. |
| , |
| correctly. |
|
|
44