Playback

Playing Discs

1 Switch the input selector on your

TV so that the signal from the player appears on your TV screen.

2 Press Z on the player, and place a disc on the disc tray.

Playback side facing down

3 Press N.

The disc tray closes. The player starts playback (continuous play). Adjust the volume on the TV or the audio component.

Depending on the disc, a menu may appear on the TV screen. For DVD VIDEOs, see page 8. For VIDEO CDs, see page 20.

If a disc is inside the player

Press N.

To stop playback

Press x.

To pause playback

Press X.

One-Touch Play (for HDMI connections only)

With one touch of the N button on the remote, the player and your TV automatically turn on and the TV’s input is switched to the player. Playback starts automatically.

The TV’s input will also switch to the player automatically, in the following cases:

–You press N, TOP MENU, MENU, or DISPLAY buttons on the remote.

Note that these buttons are not effective when you play audio CD or music files in “MUSIC” mode.

–If a disc with auto play function is loaded.

–If you push the disc tray to close.

z

You can have the player turned off automatically whenever you leave it in stop mode for more than 30 minutes. To turn this function on or off, set “AUTO POWER OFF” in “CUSTOM SETUP” to “ON” or “OFF” (page 37).

b

•Depending on the DVD or VIDEO CD, some operations may be different or restricted.

Refer to the operating instructions supplied with your disc.

•Discs created on DVD recorders must be correctly finalized before they can be played. For more information about finalizing, refer to the operating instructions supplied with the DVD recorder.

Note on playing DTS sound tracks on a

DVD VIDEO

DTS audio signals are output only through the

DIGITAL OUT (COAXIAL)/HDMI OUT jack.

To resume playback from the point where you stopped the disc (Multi-disc Resume)

When you press N again after you stop playback, the player starts playback from the point when you pressed x.

z

•To play from the beginning of the disc, press x twice, then press N.

•With DVD VIDEOs and VIDEO CDs, the player stores the point where you stopped the disc for up to 6 discs and resumes playback the next time you insert the same disc. If you store a resume playback point for the seventh disc, the resume playback point for the first disc is deleted.

Playback

,continued 19