42US
Using an S-AIR Product
When you purchase the S-AIR product, you
need to perform the following settings to
activate wireless transmission.
About S-AIR products
There are two types of S-AIR product.
• S-AIR main unit (this unit) : This is for
transmitting sound. You can use up to three
S-AIR main units. (The number of usable
S-AIR main units depends on the use
environment.)
• S-AIR sub unit: This is for receiving sound.
–Surround amplifier (optional): You
can enjoy surround speaker sound
wirelessly.
–S-AIR receiver (optional): You can
enjoy system sound in another room.
To make use of the S-AIR function, you need to
insert the wireless transmitter into the unit and
the wireless transceiver into the S-AIR sub unit.
Note
•When you insert the wireless transm itter/transceiver,
make sure that the AC power cord (mains lead) is not
connected to a wall outlet (mains).
•Do not touch the terminals of the wireless trans mitter/
transceiver.
To insert the wireless transmitter
into the unit
1Remove the screws directly below the
mark.
Note
•Remove the screws that are indicated in the
illustration. Do not remove other screws.
2Insert the wireless transmitter.
Note
•Insert the wireless transmit ter with the S-AIR
logo facing up.
•Insert the wireless transmit ter so that the V
marks are aligned.
•Do not insert anything other than the wireless
transmitter into the EZW-T100 slot.
External Audio Device

Inserting the wireless

transmitter/transceiver

S-AIR sub unit
(surround amplifier)
S-AIR main unit
S-AIR sub unit
(S-AIR receiver)
(not supplied)
Room A
Room B
EZW-T100
EZW-T100
Rear of the unit
EZW-T100
EZW-T100
Rear of the unit