46US
4Press X/x to select [S-AIR Settings],
then press .
The [S-AIR Settings] display appears.
5Press X/x to select [RF Change], then
press .
6Press X/x to select the desired setting,
then press .
•[Auto]: Normally select this. The sys tem
changes [RF Change] to [On] or [Off]
automatically.
• [On]: The system transmits sound by
searching for the better channel for
transmitting.
• [Off]: The system transmits sound by
fixing the channel for transmitting.
7Press .
The setting is made.
8When you set [RF Change] to [Off],
select the ID so that wireless
transmission is most stable (page 43).
Note
•In most cases, you will not need to change this
setting.
– If [RF Change] is set to [Off], transmission
between the unit and S-AIR sub unit can be
performed using one of the following channels.
– S-AIR ID A: equivalent channel for IEEE
802.11b/g channel1
– S-AIR ID B: equivalent channel for IEEE
802.11b/g channel6
– S-AIR ID C: equivalent channel for IEEE
802.11b/g channel11
•The transmission may be improved by changing the
transmission channel (frequency) of the other
wireless system(s). For details, refer to the operating
instructions of the other wireless system(s).