Chapter 6 Adjusting and Setting Through Menus
Chapter 6 Adjusting and Setting Through Menus 81 (GB)
LABEL DISP Selects whether or not to display the tape label.
ON : Displays the tape label.
OFF: Hides the tape label.
Notes
•The tape label is displayed only on the LCD monitor or MONITOR VIDEO output.
•The tape label is only displayed if you have set the DISPLAY SELECT selector to DATA.
•If the tape label has been made with another VCR or camcorder, this unit cannot display a
tape label that includes a font that the unit does not have.
Icon/Menu Submenu Setting
(page)
CM SET menu
CM
CM SET CM SEARCH Selects the mode used to search scenes.
ON : Searches scenes using the cassette memory. (If the cassette does not have
cassette memory, the search for the scenes can be done using the search signals on
the tape.)
OFF: Always searches scenes using the search signals on the tape.
TITLE DISP Selects whether or not to display the title.
ON : Displays the title.
OFF: Hides the title.
Notes
•The title input with the camera or external device is displayed. You cannot enter a title
using this unit.
•The unit cannot display a font that the unit does not have.
•The title is displayed only on the LCD monitor or MONITOR VIDEO output.
•The title is only displayed if you have set the DISPLAY SELECT selector to DATA.
Icon/Menu Submenu Setting
(page)
RMT
REMOTE 232C RATE Selects the baud rate via the RS-232C connector.
9600 : 9600 bps
19200: 19200 bps
Note
For editing, if you intend to use this unit as a player and the FXE-120/120P or FXE-100/
100P as an editing controller, set the baud rate of both devices to 19200 bps.