Sony DSR-45, 45P DSR-45/45P time codes

Chapter 4 Setting the Time Code and Adjusting the Video Signals
Chapter 4 Setting the Time Code and Adjusting the Video Signals 63 (GB)
DSR-45/45P time codes
This unit has a DV jack. The time code output and
recorded on the tape differs as shown below when the
INPUT SELECT selector is set to DV and when it is set
to other than DV.
EE
INTERNAL
DV
S VIDEO
VIDEO
COMPONENT
(Except DV)
TC&UB EXT
TC EXT
UB EXT
DV
S VIDEO
VIDEO
COMPONENT
(Except DV)
TC/UB IN
menu INPUT SELECT
selector Mode TC IN The time code output from the
TC OUT connector and the time code/
user bits recorded on the tape
Playback
Playback
Audio dubbing
Playback at various
speeds a)
DUB1 b)
Time code/user bits on the tape
JOG TC OUT: ON – Time code/user bits on
the tape;
JOG TC OUT: OFF – Mute (No output)
Duplicate
DUP1 b) Time code/user bits of another device
connected to the DV jack c)
Recording
Recording Pause
REC1 b) Time code/user bits internally generated c)
Recording
Recording Pause
REC1 b) Time code/user bits internally generated c)
Duplicate
DUP1 b) Time code/user bits of another device connected to the DV jack c)
Recording
Recording Pause
REC1 b) Time code/user bits internally generated c)
Recording
Recording Pause
REC1 b)
Yes Time code/user bits connected to TC IN are
through-output.
No
No output from the TC OUT connector
(For
details, see next page.) : the time code
generated internally is recorded on the taped).
a) This includes stop, fast-forward or rewind. If the unit
cannot read the time code on the tape correctly, the
counter displays “– –:– –:– –:– –” and the time code is
not output from the TC OUT connector.
b) “DUB1”, “DUP1” and “REC1” represent the state of the
unit when you press each of these buttons (AUDIO DUB,
DUP or REC) in the stop mode. If the counter displays
“– –:– –:– –:– –”, the time code is not output from the TC
OUT connector when you press the AUDIO DUB button
in the stop mode.
c) The time code is also displayed on the time counter
display in the display window.
d) When TC/UB IN is set to TC EXT, the user bits set in
UB PRESET are recorded. When TC/UB IN is set to UB
EXT or TC&UB EXT, “00 00 00 00” is recorded as the
user bits.
e) Only when REC MODE on the VTR SET menu is set to
DVCAM. When REC MODE is set to DV SP, the
internally generated time code is output.
When DV IN TC is set to INTERNAL
When DV IN TC is set to EXTERNAL and the INPUT SELECT selector is set to DV
EE
Mode
Duplicate
DUP1 b)
Recording
Recording Pause
REC1 b)
Time code/user bits of another device connected to
the DV jack c)
The time code output from the TC OUT connector
and the time code/user bits recorded on the tape
Time code input of another device connected to the
DV jack and user bits internally generated e)