Left and Upper View

Front section

1 Shoulder strap fitting

2 Attachment shoe for large viewfinder

3 Accessory fitting shoe and screw hole

4 Viewfinder left-to-right positioning ring

5 Viewfinder fitting shoe

6 REMOTE connector 1

7 Viewfinder front-to-back position locking knob

8 Fitting for optional microphone holder

9 Video light connector

0 LENS connector

qa VIDEO OUT connector

qs REMOTE connector 2

Overview 1 Chapter

1Shoulder strap fitting

To use the supplied shoulder strap, fix one end here and the other end to the right side.(See page 38.)

2Attachment shoe for large viewfinder This allows you to attach the optional electronic viewfinder. (See page 35.)

3Accessory fitting shoe and screw hole

Attach optional video lights or other accessories here. (See page 37.)

4Viewfinder left-to-right position fixing ring Loosen this ring to adjust the left-to-right position of the viewfinder. (See page 34.)

5Viewfinder fitting shoe

Fix the DXF-801/801CE Viewfinder here. (See page 34.)

6REMOTE connector 1 (mini-jack)

Connect the RM-LG1 Remote Control Unit to enable remote operation of the ClipLink function.

If you connect the optional cable (Sony part number:

1-790-779-11) to this connector, you can control the zoom using the optional RM-VJ1 Remote Control Unit (equipped with microphone and monitor), even if you use the conventional lens.

For details, consult your Sony dealer.

Note

The RM-81 cannot be connected.

7Viewfinder front-to-back position locking knob Loosen this knob to adjust the front-to-back position of the viewfinder. (See page 34.)

8Fitting for optional microphone holder

You can fit an optional CAC-12 Microphone Holder here. (See page 36.)

9Video light connector

A video light with a maximum power consumption of 30 W such as the Anton Bauer Ultralight 2 or equivalent can be connected. (See page 37.)

Chapter 1 Overview 23