54
When the DVDirect waits a video signal to resume
recording, the message [Waiting for input signal.]
appears in the DVDirect’s display window. If no video
signal is detected for 2 minutes, the DVDirect stops
recording. (As video devices always output video
signals from their operation screen or TV screen other
than playback, some video devices may not operate as
above.)
3Press the (stop) button to stop
recording.
4To record an additional video, repeat
steps 2 and 3.
5Press the Z (eject) button to eject the
disc when recording is complete.
6To finalize the disc, press V or v to
select [Yes] and press the ENTER
button.
If you select [No] and press b, the disc will be
ejected without being finalized. You can skip
step 7 below.
zHint
• To finalize a disc means to make the disc playable on
other DVD devices. For details about finalizing, refer
to [Auto Finalizing] or [Finalize disc] on page 67.
7Press V or v to select [OK] and press
the ENTER button.
When finalizing has completed, the disc tray
automatically opens.
Notes on copying manually from a video
device
• When connecting the camera to the DVDirect
with a DV (i LINK) cable, a video appears in
the DVDirect’s display window a little behind
appearing in the camera’s LCD screen. When
copying a video, operate the DVDirect while
monitoring the DVDirect ‘s display window.
• Start recording immediately after inserting a
disc. The recording process may take a few
seconds to start after pressing the (record)
button if the disc was inserted more than 10
minutes prior to starting.
• When you press the (stop) button, you may
hear the noise of the disc turning momentarily.