132
Compensating for the brightness and contrast automatically (D-Range)
•When shooting with the D-Range optimizer, the image may be noisy. Select the
proper level by checking the recorded image, especially when you enhance the
effect.
*_Ev displayed with is the step currently selected.

• Since the shutter is released 3 ti mes for 1 shot, be careful about the

following:

–Use this f unction when the subjec t is motionless or does n ot blink.

–Do not recompose.

Notes
•You cannot use this function on RAW images.
•When the exp osure mode is set to Intelligent Auto, Superior Auto, Sweep Panorama,
3D Sweep Panorama, Continuous Advance Priority AE Mode or Scene Selection, or
when [Multi Frame Noise Reduct.] is selected, you cannot select [Auto HDR].
•You cannot start the next shoot until the capture process is completed after you
shoot.
•You may not obtain a desired effect depending on the luminance difference of a
subject and the shooting conditions.
•When the fla sh is used, this function has little effect.

Auto HDR

1Fn button t (DRO/Auto HDR) t (Auto HDR)
2Select an optimal level with b/B on the control button.
(Auto HDR:
Exposure Diff. Auto)
Corrects the exposure difference automatically.
(Exposure
Difference Level)*
Sets the exposure difference, based on the contrast of the
subject. Select the optimal level between 1.0Ev (weak) and
6.0Ev (strong).
For example: When 2.0Ev is selected, 3 images are overlaid:
an image with –1.0Ev, an image with the correct exposure,
and an image with +1.0Ev.
Shooting technique