For customers in the USA

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

WARNING: THIS WARNING IS APPLICABLE FOR USA ONLY.

If used in USA, use the UL LISTED power cord specified below.

DO NOT USE ANY OTHER POWER CORD.

Plug Cap Parallel blade with ground pin

 

(NEMA 5-15P Configuration)

Cord

Type SJT, three 16 or 18 AWG

 

wires

Length

Less than 2.5 m (8 ft 3 in)

Rating

Minimum 10 A, 125 V

Using this unit at a voltage other than 120V may require the use of a different line cord or attachment plug, or both.

To reduce the risk of fire or electric shock, refer servicing to qualified service personnel.

WARNING: THIS WARNING IS APPLICABLE FOR OTHER COUNTRIES.

1Use the approved Power Cord/Plug with earthing-contacts that conforms to the safety regulations of each country if applicable.

2Use the Power Code/Plug conforming to the proper ratings (Voltage, Ampere).
For customers in Europe

This product with the CE marking complies with the EMC Directive (89/ 336/EEC) issued by the Commission of the European Community. Compliance with this directive implies conformity to the following European standards:

•EN60065: Product Safety•EN55103-1: Electromagnetic Interference (Emission)•EN55103-2: Electromagnetic Susceptibility (Immunity)

This product is intended for use in the following Electromagnetic Environment(s): E1 (residential), E2 (commercial and light industrial), E3 (urban outdoors), and E4 (controlled EMC environment, ex. TV studio).

2 (E)