Locations and Functions of Parts and Controls
1POWER switch Turns the power on or off.2POWER indicator

The indicator lights up when the power is turned on. This indicator does not light up, however, when the BP-L60A/L90A Lithium-Ion Battery Pack is used as the back-up power supply.

3AC input connector Connects to an AC power source through an optional AC power cord.

4DC output connector (4-pin) Supplies DC power through the supplied DC cable to the DNW-A220/ A220P or other portable device. The No.4 pin is the plus connector and the No.1 the minus.

5Battery charging connector (5-pin)

Supplies power for charging a BP- L60A/L90A Lithium-Ion Battery Pack.

The two outside pins are sensors which block the charging current when a battery other than a Lithium- Ion Battery has been mistakenly attached.

6DC output connector (5-pin) Supplies DC power to portable editors and field editors, connected directly to the AC-DN2B.

When the AC-DN2B is attached to a Betacam SP camcorder, such as the BVW-300/300P/BVW-400/400P, through the optional BKW-L601 or BKW-L601/2 Battery Adaptor, DC power is supplied to the camcorder.

6 (E)